Skip to content

how to get names in paltalk room to a listbox?

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #190661
    toxinburn
    Member

    Hi i was trying to find a simple code to get the names from a room in palktalk and add them to a list1.list on form1 with a click of a command button anyone that has a template or code that does this I would greatly appreciate it, I know how to find the window I need just not sure how to direct that info to the list, when i use my sub of getnames in a button like this

    getnames (list1.list)

    it doesnt work…..anyone have idea?

     

    Dim LCount As Long
    Dim dlggroupchatwindowclass As Long
    Dim splitterwindowex As Long
    Dim cwndmembertree As Long
    Dim syslistview As Long
    
    dlggroupchatwindowclass = FindWindow("dlggroupchat window class", vbNullString)
    splitterwindowex = FindWindowEx(dlggroupchatwindowclass, 0&, "splitterwindowex", vbNullString)
    splitterwindowex = FindWindowEx(splitterwindowex, 0&, "splitterwindowex", vbNullString)
    splitterwindowex = FindWindowEx(splitterwindowex, 0&, "splitterwindowex", vbNullString)
    splitterwindowex = FindWindowEx(splitterwindowex, 0&, "splitterwindowex", vbNullString)
    splitterwindowex = FindWindowEx(splitterwindowex, 0&, "splitterwindowex", vbNullString)
    cwndmembertree = FindWindowEx(splitterwindowex, 0&, "cwndmembertree", vbNullString)
    syslistview = FindWindowEx(cwndmembertree, 0&, "syslistview32", vbNullString)
    LCount = SendMessageLong(syslistview, LB_GETCOUNT, 0&, 0&)
    
    If syslistview = 0 Then
    MsgBox "Error: Cannot find window"
    Exit Sub
    End If

     

    also tried to make it work with this following code

     

    Dim TheText As String, TL As Long
    Dim dlggroupchatwindowclass As Long
    Dim splitterwindowex As Long
    Dim cwndmembertree As Long
    Dim syslistview As Long
    
    dlggroupchatwindowclass = FindWindow("dlggroupchat window class", vbNullString)
    splitterwindowex = FindWindowEx(dlggroupchatwindowclass, 0&, "splitterwindowex", vbNullString)
    splitterwindowex = FindWindowEx(splitterwindowex, 0&, "splitterwindowex", vbNullString)
    splitterwindowex = FindWindowEx(splitterwindowex, 0&, "splitterwindowex", vbNullString)
    splitterwindowex = FindWindowEx(splitterwindowex, 0&, "splitterwindowex", vbNullString)
    splitterwindowex = FindWindowEx(splitterwindowex, 0&, "splitterwindowex", vbNullString)
    cwndmembertree = FindWindowEx(splitterwindowex, 0&, "cwndmembertree", vbNullString)
    syslistview = FindWindowEx(cwndmembertree, 0&, "syslistview32", vbNullString)
    TL = SendMessageLong(syslistview&, WM_GETTEXTLENGTH, 0&, 0&)
    TheText = String(TL + 1, " ")
    Call SendMessageByString(syslistview&, WM_GETTEXT, TL + 1, TheText)
    TheText = Left(TheText, TL)
    
    If syslistview = 0 Then
    Msgbox "Error: Cannot find window"
    Exit Sub
    End If

     

    anyways tell me what you think i should try, i can see similar questions have been asked before and I have yet to see anyone show how this is performed other than saying it is hard.

    #190671
    String
    Member

    @toxinburn wrote:

    i can see similar questions have been asked before and I have yet to see anyone show how this is performed other than saying it is hard.

    With a basic understanding of programming, it isn’t hard at all. Neither of the unnamed code blocks you posted make any reference to adding anything to a list box, so its no wonder it doesn’t work.

    I’ve posted several examples/code on how to do this and so have many others. But, if I were you, id go back to vb2010 and let vb6 go. You gave up on .net to quickly.

    Here is a quick example using Auto’s modules, lightly tested on latest pal version.

    #190670
    toxinburn
    Member

    thanks ya I had messed with the coding on both of those to try to make it add it to a list box using a string, just didnt work for me i will take a look at this and probably be like DUH thanks again.

    #190669
    Chike
    Member

    There is only one syslistview32 (or whatever it is now) in the room window therefore you can simply search it with EnumWindows. For that you need a callback function that will stop the search when a syslistview32 is found and will return it’s handle in the callback parameter(preffered over global variable).

    #190668
    String
    Member

    This is an update to my previous example. My example above is for versions of pal older than 10.2 485.
    The example below is for 10.2 485 and, possibly, newer. I only tested this on 10.2 485.

    #190667

    @String wrote:

    This is an update to my previous example. My example above is for versions of pal older than 10.2 485.
    The example below is for 10.2 485 and, possibly, newer. I only tested this on 10.2 485.

    This isnt working in 10.3

    #190666
    ChiNa
    Administrator

    @deeva2 wrote:

    @String wrote:

    This is an update to my previous example. My example above is for versions of pal older than 10.2 485.
    The example below is for 10.2 485 and, possibly, newer. I only tested this on 10.2 485.

    This isnt working in 10.3

    You need to update the “Nicklist” Class Mate.. Paltalk had changes since 10.2, and especially the nicklist class is changed! If you dont know how to do it please report back…. But I am also new and I had to learn the basics myself, so give it a shot and find out how to update the nicklist class..

    #190665

    @ChiNa-Man wrote:

    @deeva2 wrote:

    @String wrote:

    This is an update to my previous example. My example above is for versions of pal older than 10.2 485.
    The example below is for 10.2 485 and, possibly, newer. I only tested this on 10.2 485.

    This isnt working in 10.3

    You need to update the “Nicklist” Class Mate.. Paltalk had changes since 10.2, and especially the nicklist class is changed! If you dont know how to do it please report back…. But I am also new and I had to learn the basics myself, so give it a shot and find out how to update the nicklist class..

    Alright China, ill do that now

    #190664

    Aha I got it now. Awesum!

    #190663
    Johnny5
    Member

    Hi String,

    Thank you for the example, do you have an example that is working for paltalk 10.4?

    #190662
    ChiNa
    Administrator

    Hi String,

    Thank you for the example, do you have an example that is working for paltalk 10.4?

    Hi Johnny5. Its not because its not working, but because Paltalk is changing the Nicklist class everytime a new update is out. I suggest that you try fix it by yourself so you always know how to fix it, just like user “deeva2” and like myself. I have


    Here is a Screenshot where the Niclist class Code is Located (Use a Spy++ Tool / Windows Finder)

    1) Open the Project, and simply find the “Niclist” Class in your Form Code under the “Paltalk Controls” Section… Or if you have Auto-Pilots “Paltalks Component Package” where the Nicklist class is located in mdlpalinfo.vb…
    2) Try to Download the Window Finder that I have attached below.
    3) Open your Paltalk Messenger and Join a room.. Or open your own room!
    – Now Start the Window Finder Tool, Click on the “Search” Tab*Menu >> Find Window
    4) Now simply Drag and Drop the Blue/Black circle where the Nicknames are in the room.. Shown on the Image above..
    5) After you get the Nicklist Class Code, Simply add the new Niclist class in the Niclist Class found in yiour form “Paltalk Controls”!

    Good luck mate!

    I have attached a WindowFinder below so you can use that to find the Window Class names… If you have any questions feel free to ask!

Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.