How to raise hand and mute on room entry?

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #188631
    method
    Member

    could any one show me how to raise hand mute on room entry all automatic?so i want these 2 action of raising hand and muting get triggred on entry to the room.Thanks

    #188643

    just two clicks you can do it manually lol 😆 but you can use reshak something like that posted on this forum to get id of mute and raise hand and use postmessage to do that job

    if you want to do that action when u enter room maybe you have to use enumwindow to detect new pt window and postmessage to the correct window

    #188642
    method
    Member

    @nanomachine007 wrote:

    just two clicks you can do it manually lol 😆 but you can use reshak something like that posted on this forum to get id of mute and raise hand and use postmessage to do that job

    if you want to do that action when u enter room maybe you have to use enumwindow to detect new pt window and postmessage to the correct window

    how to get id of mute and rasie hand ? I tried alot and did not work . could u just show me an example of how to do an action on room entry.thanks

    #188641

    I’m too lazy man 😀 , wait I will search in my old folder to find reshack then find id of mute and raise id for U 😆

    #188640
    method
    Member

    @nanomachine007 wrote:

    I’m too lazy man 😀 , wait I will search in my old folder to find reshack then find id of mute and raise id for U 😆

    thanks man. i be happy if u show me how to trigger those actions on entry . i think that part is hard

    #188639

    it’s not hard just take a little time to validate if there are new pt window and post message to the correct window.

    loco maybe can help U, I’m too lazy if you want to know how to to mute and raise hand . Do u know how to mute or raise hand ?? here the example u can check

    #188638
    method
    Member

    Thank u for this cool example. could u tell me how did u get the numbers :

    33025 and 33118? how to get that for specific window ?Thanks

    #188637

    I use reshack posted by loco. check around this forum u will find it. time to go to bed lol it’s 3:22 am in canada(zzzzzzzzzzzzzzzzzzzzzzzzz). talk to U later

    #188636
    Locohacker
    Administrator

    Aigh its easy to get them numbers check this post it shows you the steps 🙂

    #188635
    method
    Member

    @locohacker wrote:

    Aigh its easy to get them numbers check this post it shows you the steps 🙂

    loco thanks i found the code but how to trigger then upon room entry?

    #188634
    michtob
    Member

    @BattleStar-Galactica wrote:

    it’s not hard just take a little time to validate if there are new pt window and post message to the correct window.

    loco maybe can help U, I’m too lazy if you want to know how to to mute and raise hand . Do u know how to mute or raise hand ?? here the example u can check

    code not work at paltalk 9.1??????

    how is wrong?????

    #188633
    autopilot
    Member

    Edgar

    You would be best served to search this site for code samples to connect to pal rooms. Once you know how to connect to the Paltalk room, then you will have the information to start sending commands to it.

    I do not mind helping those who try to help themselves… but I will not spoon feed those who are too lazy to do any work themselves. On this site are many examples of how to get connect to any pal room.

    autopilot

    #188632
    Locohacker
    Administrator

    Eww, these chips are stale…

    But yea, do what autopilot said. Also, this is like a year old? So, no.

    -Locked

Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.