Skip to content

Auto Away Message Changer

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • March 8, 2008 at 9:37 pm #176275
    autopilot
    Member

    This is my newest paltalk integration. I know that a few others have already done it, but here is my twist.[attachment=0:z0o2dyh9]AutoAway.PNG[/attachment:z0o2dyh9]

    EDIT: I have made an update to this program. See HERE

    March 9, 2008 at 3:45 am #176288
    PreciouS HearT
    Member

    Nice – pilot bro
    its cool 😀
    Its not like mine – some times am getting dc with this – and when away msg is changing thn its changing like coming Pop-Up – opening new window…
    but the main problem is – if i use this one thn am getting D.C.

    anyway – thanks for share 😳

    March 9, 2008 at 4:25 am #176287
    autopilot
    Member

    i found if i set it up under 30 sec time interval, then i would get dropped by pal… otherwise i am good…

    March 9, 2008 at 9:25 am #176286
    Chike
    Member

    @PreciouS HearT wrote:

    and when away msg is changing thn its changing like coming Pop-Up – opening new window…

    I haven’t tried this program, but I have once posted code that shows how to find the commands in paltalk menus, you may use this to avoid opening the window for away messages that are already in it, and send them directly to pal main window.

    March 9, 2008 at 4:05 pm #176285
    PreciouS HearT
    Member

    Thanks my friend – autopilot
    yes i know – if i set there 1 minute or more thn its good… but bro – we are using this program to change our status after every 10 or 15 seconds… otherwise we can change this normally 🙂

    @Chike wrote:

    @PreciouS HearT wrote:

    and when away msg is changing thn its changing like coming Pop-Up – opening new window…

    I haven’t tried this program, but I have once posted code that shows how to find the commands in paltalk menus, you may use this to avoid opening the window for away messages that are already in it, and send them directly to pal main window.

    Well my friend – Chike
    already i have this one…and this is nice to use… if i set there 10 or 15 seconds thn its never giving me D.C. 🙂
    thanks Chike bro

    March 11, 2008 at 7:54 pm #176284
    Admin
    Administrator

    Great one auto ya save me again ehhe 🙂 thanks

    March 13, 2008 at 12:37 pm #176283
    ocean_13
    Member

    9ice mate……atleat we got auto away msg…gr8 😀

    March 13, 2008 at 4:27 pm #176282
    autopilot
    Member

    As it is in the curret form, my away message changer is only usable if you truely are away. Otherwise, it keeps stealing the PC focus. I am working on changing to use the menu commands directly. This means that you will add all wanted messages through you Paltalk program, and then the changer will just rotate through what is in pal. My testing still shows that a time interval less then 30 seconds results in pal dropping you. Look for an update in the next few days.

    March 13, 2008 at 8:29 pm #176281
    autopilot
    Member

    Here is the update to AutoAway. [attachment=2:2lyxixvf]AutoAwaySS2.PNG[/attachment:2lyxixvf]
    If the bottom red error icon is displayed, the application can not find the main paltalk window (paltalk is not running). If the top red error icon is displayed, the away messages have not been made active. To make the away messages active, just open the Change my status menu until the error icon is cleared. [attachment=1:2lyxixvf]ChangeStatus.PNG[/attachment:2lyxixvf]
    Once you have cleared both error icons, the application will change your away messages automaticly.

    March 13, 2008 at 8:56 pm #176280
    Chike
    Member

    Hmmmmmm, what’s the reason for oppening the menu?
    Are the away messages not added to it till it first open?

    March 13, 2008 at 10:01 pm #176279
    autopilot
    Member

    @Chike wrote:

    Hmmmmmm, what’s the reason for oppening the menu?
    Are the away messages not added to it till it first open?

    I am not sure about what is going on inside of pal, but it does seem that they don’t add the commands until you open the change my status menu (or at least I couldn’t read them until after the menu was opened).

    March 13, 2008 at 10:26 pm #176278
    Chike
    Member

    @autopilot wrote:

    I am not sure about what is going on inside of pal, but it does seem that they don’t add the commands until you open the change my status menu (or at least I couldn’t read them until after the menu was opened).

    That’s normal behaviour. Windows has a set of messages it sends to the application before the menu is oppened to allow it to modify the menu.
    There are 2 menus that need to be changed when messages are changed or loaded, the one you are using, and the one that pop up inside the window where you can also change the status. Paltalk programmers probably decided to change them only when and if needed.
    Now all is left is to figure is what messages they are acting upon.
    Hopefully there’s a solution, not trivial (until you understand what’s going on) but i believe it can be solved. I’ll look into it tomorrow.

    March 14, 2008 at 8:56 am #176277
    Chike
    Member

    I have found a solution 😉 but i don’t wanna spoil the fun for you.

    March 14, 2008 at 9:06 pm #176276
    autopilot
    Member

    It has come to my attention that the dll file included in the above installer is the wrong version. so here is a new installer with the correct dll 😳

  • Author
    Posts

Related

Viewing 14 posts - 1 through 14 (of 14 total)
  • You must be logged in to reply to this topic.