Skip to content

multipal logins… (palpalpal replacement)

Viewing 15 posts - 1 through 15 (of 65 total)
1 2 3 4 5
  • Author
    Posts
  • January 4, 2008 at 12:01 am #176354
    autopilot
    Member

    This is my first try at a multiple pal login program. It should continue to work even if you take a pal update.
    [attachment=0:1tn68j1n]MultiPal.PNG[/attachment:1tn68j1n]
    About the best I could do was 4 to 6 pals at once. More then 6 and they were auto loging in before I could stop them.

    Try it out and let me know how it works for you.

    PS… The “CleanUp” button will remove all “Copies” of the paltalk.exe but not the original paltalk.exe. The “CleanUp” must be run while you are NOT logged into paltalk because it will kill any pal windows that it (multipal) opens.

    Note: Just because you set it for 6 (or whatever) pal logins, does not mean that you will get 6 (or whatever) logins. It will attempt to open all 6 (or whatever), but depending on your pc, it may not get them all. Just keep trying!

    EDIT: Removed file… see below for update.

    January 4, 2008 at 5:07 pm #176418
    autopilot
    Member

    I have added an autostart option to the multipal program to automaticly launch the multiple paltalks as soon as you start it. I also added a bit more logging.
    [attachment=0:1bgkpikg]MultiPal1.PNG[/attachment:1bgkpikg]

    EDIT: See below for update v1.0.0.3

    January 5, 2008 at 12:21 am #176417
    Admin
    Administrator

    damn this program great 🙂 hey can I put on the download area lots of people are looking for it :swift:

    January 5, 2008 at 2:03 am #176416
    Chike
    Member

    Nice,

    When I installed it in PaltalkScene group (that’s all I’ve tried) it placed it in a sub group “Paltalk Messenger” inside PaltalkScene group.
    When I uninstalled it it deleted the installer from where it was, so I am guessing it must not be deleted. Could you put it in the folder yoou install it to instead?

    January 5, 2008 at 2:26 am #176415
    autopilot
    Member

    @Chike wrote:

    When I uninstalled it it deleted the installer from where it was, so I am guessing it must not be deleted. Could you put it in the folder yoou install it to instead?

    The uninstaller will delete the folder were the app is installed… so if you placed the installer there, then it was deleted…

    January 5, 2008 at 2:31 am #176414
    autopilot
    Member

    @Admin wrote:

    damn this program great 🙂 hey can I put on the download area lots of people are looking for it :swift:

    you can do with it as you like… once it is on your site, i figure i have released it to you…

    For release on LocoHacker ONLY

    January 5, 2008 at 3:43 pm #176413
    Admin
    Administrator

    Thanks man 🙂 a lotttttttttttttt of people bein looking for it since :altay:

    January 5, 2008 at 8:36 pm #176412
    Executioner
    Member

    when i click on START there is nothing opened how should i use it ?

    January 6, 2008 at 12:09 am #176411
    Admin
    Administrator

    umm, the way to use is you first run it one time, then you decide how many paltalks you would liek to open at one time 🙂 now then click start. one thing it might take like 3 or more tries at lsit for me for all paltalk windows to open sometimes it only opens one, but try again and again til all open at the same time.

    tips: it works best if you put it on auto start that way all you do is click on the multipal icon on the desktop and try no to have nothing else open 🙂 then you should see all paltalks open :swift:

    And like I say sometimes it takes more then one try for them to open. :frank:

    January 6, 2008 at 12:21 am #176410
    Admin
    Administrator

    Here my multi pic 🙂 and the best thing you can go to the same room lol with all the nicks lol :mrgreen:

    January 6, 2008 at 2:32 am #176409
    autopilot
    Member

    @Executioner wrote:

    when i click on START there is nothing opened how should i use it ?

    You can try to turn on logging to see what is happening. When you have logging turned on, the program will save the log on program exit. Look in the installation folder (default is C:Program FilesautopilotMultiPal) for log files (MultiPalYYYYMMDD.log).

    If you use logging all the time, you should periodicly clean up the old log files.

    January 6, 2008 at 3:10 pm #176408
    Chike
    Member

    @autopilot wrote:

    You can try to turn on logging to see what is happening. When you have logging turned on, the program will save the log on program exit. Look in the installation folder (default is C:Program FilesautopilotMultiPal) for log files (MultiPalYYYYMMDD.log).

    If you use logging all the time, you should periodicly clean up the old log files.

    Could be that he has a paltalk process running, case in which nothing realy happen and there’s no error in the logs.
    BTW the path error notification icon is cool.

    January 6, 2008 at 10:20 pm #176407
    autopilot
    Member

    @Chike wrote:

    Could be that he has a paltalk process running, case in which nothing realy happen and there’s no error in the logs.

    Very good point… I thought about making it earlier but figured that it was common sense… 😆 Maybe I should add a process check to notify if pal is already running…

    @Chike wrote:

    BTW the path error notification icon is cool.

    thanks… real easy to add with VS 2005… simple ErrorProvider control 😀

    January 6, 2008 at 10:22 pm #176406
    DarkCoder
    Member

    tacos
    mmmmm tacos

    January 7, 2008 at 12:32 am #176405
    Departure
    Member

    @autopilot wrote:

    For release on LocoHacker ONLY

    😥 Thats ashame autopilot I was looking forward to something like this, Ohhh well Namomachine released a multipal login nearly a year ago maybe he will update it for cheesydoodle members

  • Author
    Posts

Related

Viewing 15 posts - 1 through 15 (of 65 total)
1 2 3 4 5
  • You must be logged in to reply to this topic.